Product information:
Specifications: 2.2～2.8MM
Model:GPMA-520
Size: Length: 14.3 cm
Use:
Can be written on any surface, metal, glass, wood, stone, plastic, paper, etc., and has a wide range of uses.
Features:
Special fiber nib, smooth and smooth writing, strong coverage, rich colors, no fading.
Instructions:
Before use, shake the pen body several times, with the nib facing upward, press the thumb several times to release the air in the pen barrel, and then gently press the nib on the paper several times until the ink seeps out of the nib, and the ink can be written evenly. The cap must be tightly closed after writing to prevent the ink from evaporating.

Usage and precautions:

1. Shake for more than 30 seconds before use;

2. Good vertical use effect;

3. Do not shake during use. If necessary, please shake it away from the car body to avoid splashing of paint;

4. Before the first use, please press down the pen tip a few times on the waste paper until you see the paint flowing out of the pen tip. Do not press the pen tip too hard, otherwise a large amount of paint may flow out;

5. Please seal the pen cover immediately after use.

6. If the tire is painted wrong or the paint is splashed on other parts of the body, it can be cleaned with gasoline immediately, otherwise it will be difficult to clean after air-drying.

7. After a long time of use, if it is stained with dust and sludge, wipe it with a damp cloth and it will be as bright as new

8. This product should not be applied too thickly at one time. Generally, one layer can be applied. If necessary, you must wait for the first time to completely dry before applying the second time. Remember! Otherwise, the paint will fall off by itself because the paint is too thick! !