Filament Dryer Box with Fan 110W PTC Heater Keep Filament Dry Compatible for 1.75/2.85/3mm TPU ABS PLA Filaments 3D Prin

Extra Large Dry Box, Filament Dryer, Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament: DRY FAST, EXTRA LARGE, HIGH TEMPERATURE

1.Extra Large Homothermic Box has a large inside space, Can use 4 rolls of 0.5kg filaments/2 rolls of 1kg filaments/1 roll of 3kg filament at the same time, Suitable for multiformat filaments which including 1.75mm/2.85mm/3mm

2. Excellent drying effect
In the filament dryer, we use a 110W PTC heater to heat up space which is rare and inimitable in the market. As we know, most of the filament dryers are using a 48W PI heating pad to heat up space that cannot dry evenly. However, the same problem won’t occur in our machine because of our PTC heater technology. PTC heater is also known as durable, energy-saver, and environmentally friendly.

3.Adjustable heating temperature
The drying temperature can be set and the operation process is simple. The temperature can be set in a wider range, up to 70°C.

4.Optimized heating method
Hot air heating makes drying more efficient; the unique air duct design makes machine conform to the principle of air thermodynamics, and the filament is heated more evenly.

5.Real-time humidity monitoring
Independent humidity detector，digital display. The measuring range is from 10%to 99%. At the time when machine is working, the humidity inside the box can drop to as low as 10%(Under ideal conditions in the laboratory).

Product Specifications：

Input Voltage: AC 110V/220V 50/60Hz
Rated Power: 110W
Temperature Control Range: ≤70℃
Product Size: 213x280x305mm
Net Weight: 1.4kg Package
Size: 245x305x355mm
Total Weight: 2.0kg
Timing Length: 1min-24h or unlimited
Precision of Temperature Control: ±2℃
Maximum Capacity:
Double Reels 217x80mm
Single Reel p217x174mm
Filament Diameter: 1.75mm(need to change the Teflon Tube for 2.85mm filament)

Package Included:

1*Dryer Box (not included the Button battery of humidity sensor)

FAQ:

1. How it works?

Promoting the evaporation of water molecules by heating to ensure the 3D Printing Filaments are in the best condition.
>Put the filaments in.
>Turn on the button.
>Choose the relevant filament .
>Enjoy your print.

2.[Fan]Is the fan included in the Easdry?

Yes,fan is included,we have using a fan here to accelerate the heating speed inside of the dryer.in addition,Easdry also carry an air excelent circulation system,with the help of the fan,it will effcetively remove the moisture inside.

3.[Temperature sensor]Is the Temperature sensor included in the Easdry?

NO.there is no temperature inside of the easdry.we have did a lot of the test to make sure the temperature in the filament area will be evenly reach the most suitable temperature for the different type of the filament.During test,we have used Laboratory-grade Infrared Thermometer to make sure the temperature and we have attached some photo and video as reference.the result is pretty obvious from our prespective.w
we have already set up the drying temperature for the different type of filament,we believe this will be the easest for the users to finish their setting.

4.[Structure]Can i see the filament inside of the Easdry?

Yes.the'door'of the easdry is transparent.the condition of the filament can be monitored there.