1kg5kg10kg 20kg 30kg 50kg 100kg 150kg Film Pressure Sensor Resistive Force Sensitive Plantar Flexible Robot FSR Insole 1
Published: 11.05.2024 11:47 In stock: 642 1.3K Views
Description
we default all delivery male terminal ,if you need female terminal ,please leave a message is ok
Piezoresistive (resistive) thin film pressure sensors are varistors in circuits. When the pressure sensor has no external load, the circuit is in a high-impedance state. When external pressure is applied to the sensor, the circuit resistance decreases. Using a multimeter, the resistance value can be read directly by connecting to the external two terminals. The resistance value changes correspondingly to the external pressure. The pressure and resistance are in opposite ratios, and the pressure and conductance are linear, so the pressure change can be reversed based on the change in conductance.
Ampere's IMS series single point sensors are resistive thin film pressure sensors. The force between the 2 surfaces can be statically and dynamically tested, and the ultra-thin sensor (100 μm thick) can be easily placed directly into the test.
Aidong IMS Thin Film Resistive Sensor uses a double-sided polyester substrate to print silver electrodes, force-sensitive, insulation, and glue, respectively. The upper and lower layers of the substrate surface are then used. The opposite side is encapsulated, and the two electrodes lead out are crimped to male or female terminals. The sensor is used to test the force in the vertical direction of the sensor plane.The external two leads of the sensor are a resistor. The sensor has a large resistance (>1 MΩ) under static (no force, no bending) conditions. inApplying force on the effective area of the sensor will cause a corresponding decrease in the resistance between the two leads of the sensor. The greater the applied force, the smaller the resistance becomes.
The IMS Series Thin Film Resistive Pressure Sensors are neither dynamometers nor strain gauges. Although they have very similar properties, IMS is not suitable for accurate measurements.
the amount.
The force vs. resistance force of the IMS sensor, The figure below is a typical force VS resistance curve diagram of IMS series sensors. The force and resistance characteristics of IMS sensor can be adjusted according to customer requirements.Test pressure range.
Characteristics
Type
BiosensorUsage
Pressure SensorOrigin
Mainland ChinaOutput
Switching TransducerTheory
Resistance SensorMaterial
MixtureBrand Name
XNQJALYCYModel Number
Motion Film Pressure Sensoris_customized
Yes
