G7 laser PM2.5 dust sensor PMS7003

Published: 11.05.2024 12:12 In stock: 98 943 Views

Favorites Seal Share

6 photo

Description

The main features

1. Laser scattering principle to achieve accurate measurement

2. Zero error alarm rate

3. Real-time response and support continuous acquisition

4. Minimum resolution particle size 0.3um

5. New transmission structure, six-sided omni-directional shielding, the user does not need to carry out the air duct design

6. Ultra-thin and ultra-small design, only 12mm, suitable for portable and wearable devices

An overview of the

PMS7003 is a digital universal particle concentration sensor based on the principle of laser scattering, which can continuously collect and calculate the number of suspended particles with different particle sizes in the air per unit volume, namely the concentration distribution of particle, and then convert to mass concentration, and output in the form of universal digital interface.The sensor can be embedded into a variety of airborne particulate matter concentration related instruments or environmental improvement equipment to provide timely and accurate concentration data.

The working principle of

The sensor adopts laser scattering principle, if laser scattering produces on the suspended particles in the air, at the same time collecting light output at a specific Angle, to get the curve of the scattering light changes over time, and then the theory of using microprocessor based on MIE (MIE) algorithm, it is concluded that the equivalent grain size of particles of different size particles per unit volume and quantity.

The output

The main output is the mass and number of particulate matter in each concentration per unit volume. The unit volume of the number of particulate matter is 0.1 l, and the unit mass concentration is: microgram/cubic meter.

The output can be divided into two states: active output and passive output. After the sensor is powered on, the default state is active output, that is, the sensor actively sends serial data to the host at a time interval of 200-800ms. The higher the concentration of particulate matter in the air, the shorter the time interval, the active output can be divided into two modes:Stationary mode and quick mode, particle concentration in the air changes is small, the sensor output for a smooth mode, three times per output the same set of values, with the actual data update cycle is about 2 s, when the particle concentration in the air change is bigger, the sensor output automatically switch to a fast mode, each time has the new numerical output, the updating cycle of actual data for 200-8200 ms.