Bluetooth 5.0 MP3 Decoder Board 2*25W 50W Amplifier Audio Player 12V DIY MP3 Player Car FM Radio Module TF USB Mic Recor

50W DC 7V-16V

Model:JQ-D136BT

6.5MM Microphone function

Bluetooth version 5.0

Power supply voltage: 12V (range 7V-16V) and current not less than 2A.

Power: 2*25W, and two 25W speakers can be connected at the same time.

Connect the microphone function,

Folder switching function

Music format: MP3/WMA/WAV/APE/FLAC lossless music format.

Radio FM frequency: 87.5—107.5mhz.

Introduction of support function: Support MP3/USB/TF/LINE IN/FM/Bluetooth/remote control/DC 12V.

About structure: panel size: 75 * 50 MM, two corners of the panel and the position of screw holes, and the depth of the panel is 40 mm.

DC 5V -12V (the item without the Amplifier , it need to work with the Amplifier Board )

Bluetooth version is 5.0

Music format: MP3/WMA/WAV/FLAC/APE lossless format

Radio FM frequency: 87.5-107.5 MHZ

Support function introduction: support MP3 / USB / TF / LINE IN / FM / BLUETOOTH / remote control connection / DC 5V or 12V (optional)

About structure: Panel size: 75*50 MM, screw holes around the panel, the depth of the board is 18MM

Infrared receiver module

TF card slot: connect TF memory card (maximum support 32GB, not included);

LED: digital color screen display, showing red;

AUX interface: audio input interface

MIC: support microphone function

USB interface: connect U disk (maximum support 32GB, not included);

PREV/VOL-: short press is to select the previous song; long press is to decrease the volume

PLAY/PAUSE: short press is to switch between pause and play; long press is to radio FM automatic station;

NEXT/VOL+: short press is to select the next song; long press is to increase the volume;

MODE: Switch between USB/TF/FM/AUX/BLUETOOTH;

Package included:

1 x MP3 WMA WAV Decoder Board

1 x Remote control (without batteries)

1 x Cables