NFOX hydraulic power-off oil brake lever electric Scooter E-bike generation driving Bafang HB875 870 handle repair GT267

(Brand: NFOX) (Origin: Dongguan, China) (Model: GT267) (Weight: 292g/pair) (Brake lever type: Hydraulic brake lever) (Applicable to: hydraulic brake with 5m tubing)

The main material of the brake handle is aluminum alloy, which is refined by forging process. The appearance and texture of the polished and frosted anode are very good!

The hydraulic brake lever is an integrated oil cylinder structure, which is durable and does not leak oil!

The way the brake handle cuts off the power is magnetic induction, and the connector of the power cord is a waterproof 3-pin structure with a length of about 200mm.

The brake fluid used in the brake lever is mineral oil, which is compatible with most brakes that use mineral oil as brake fluid!

The brake supports hydraulic oil pipes with a diameter of 5mm, and each brake is provided with 4 installation parts, rubber sleeve x1, oil needle x1, copper sleeve x1, oil hose fastening screw x1

The brake can be installed on the handlebar with a diameter of about 22mm

All functions of the brake handle have been adjusted to the best state before leaving the factory. Please try not to adjust any function without permission. We are not responsible for the failure of the function caused by your own adjustment!

The above picture is the relevant dimensions of the brake handle. If you still have any unfamiliar dimensions, please contact customer service and we will measure the relevant dimensions for you!

Because there are too many types of brakes, we cannot guarantee that all models can adapt. Therefore, please refer to the relevant dimensions in the figure above to confirm whether they can adapt to your brakes. We are not responsible for not using them after purchase. Thank you!




The oil storage bottle has a diameter of 32mm and a height of 80, which is made of aluminum alloy and plastic. It is designed with vacuum gravity, and should not be used too hard to prevent oil leakage!



The above picture shows the assembled state of the NFOX tool, with advanced and reasonably designed structure to ensure no oil leakage during normal use!




The above picture shows the packaging style of the NFOX oil change and exhaust tool. It is possible to change the packaging style during the production process. The above picture is for reference only, and changing the packaging style will not be notified separately. Purchasing represents your acceptance!

Installation instructions

① Prepare products and tools>>>②Cut off oil pipes as needed>>>③ Pressing in oil needle

④ Remove the oil seal screw>>>⑤ Install the tightening screw>>>⑥ Complete installation

⑦ Install the exhaust bottle>>>⑧ Install the syringe>>>⑨ Complete oil injection exhaust