Ergebnis anzeigen
Eigenschaften
Model
Ultra-lightweight Inner TubesChoice
yesOrigin
Mainland ChinaMaterial
tpuBrand Name
YIYUEQIANLIValve length
1PCsemi_Choice
yesBeschreibung
- Material : TPU
- Model :MTB Bike 26 29 x1.95-2.6
- Valve : Schrader (AV) 45mm
- This inner tube cannot be inflated a lot when it is not installed in the outer tire, otherwise it will cause irreversible damage!
- Please use a manual air pump instead of high-speed air filling equipment such as air compressors or pumps.
- Tire inflation pressure must not exceed 5 bar/72PSI When using rims with a no-ring-lip system according to ISO/TC 31.
- Every 3° (5°F) increase in temperature would increase the tire pressure by about 1%.
- If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F),it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).
- Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F),the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.
- If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather),deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.
- Model :MTB Bike 26 29 x1.95-2.6
- Valve : Schrader (AV) 45mm
- This inner tube cannot be inflated a lot when it is not installed in the outer tire, otherwise it will cause irreversible damage!
- Please use a manual air pump instead of high-speed air filling equipment such as air compressors or pumps.
- Tire inflation pressure must not exceed 5 bar/72PSI When using rims with a no-ring-lip system according to ISO/TC 31.
- Every 3° (5°F) increase in temperature would increase the tire pressure by about 1%.
- If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F),it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).
- Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F),the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.
- If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather),deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.
Mehr anzeigen
Bicycle Inner Tube 29 26 Bike Inner Tube Ultralight Camera TPU 29x1.95 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Inch MTB Bicycle Tir
Lieferung bearbeiten Brazil
Color
Valve length
Dieses Modell ist abgelaufen und nicht bestellbar
Veröffentlicht: 08.05.2024 10:31 1.73KAnsichten
