62cc Gas Chainsaws 2-Cycle Gasoline Powered Chain Saws Handheld Cordless Petrol Chainsaws Optional 20 Inches Gas Chain S
Publicado: 10.05.2024 23:52 En stock: 5 713 Puntos de vista
Descripción
About this item
- [Safe and Reliable]:GTHAN Gas Chainsaw is designed with dual throttle switches, which need to be pressed at the same time to start, which can effectively prevent accidental starting. The high-quality brake baffle can make emergency braking, which can effectively protect your hands and ensure your safety during use.
- [High Powerful Engine]: Gas chainsaw is equiped with the latest 2-stroke cycle engine, which is high efficiency, high power, reliable work, and long life.The average specific fuel consumption of the engine is lower than that of the original engine by about 20%.The chainsaws Suitable conquer tree felling, wood cutting for lumberman's in the forest or other use.
- [Automatic lubricating System]:GTHAN 20" Gasoline Powered Chain Saw Equipped with an automatic filter system,to prevent the dust from entering into the engine,reduced fuel consumption. Automatic lubricating system, reduces the friction between the quiding board and the chain, prolongs using life.(Note :some oil will residue on chains and back flow on the bottom of clutch then drip oil. This is a common phenomenon for all kinds of chainsaws, not defective).
- [Easy to Install and Use]This Chainsaw is easy to install in minutes. Spring-assist pull cord combined with easy-to-use knob ensures fast, this simple start system make pull starts easier to rev up and get right to cutting. Notice to avoid "NOT START ISSUE": 1. Using the recommended oil ratio: Gasoline 25: Two-Cycle Oil 1. 2. Make sure that you pull the switch up at first. 3. Pull the choke knob before it start, please check the operation introduction in the product manual
- [Warmly Service]: GTHAN Gas Chainsaw has the advantages of high power, high efficiency, small size and light weight.You could contact us to solve your problems,like Technical Support,Missing parts,Damaged Parts,Parts wear and tear and so on.If there is something problems with accessories ,we will sent you a new parts.
Product Description
New upgrade power 62cc gas chainsaw for trees with easy start technology. It's suitable to conquer tree felling, wood cutting for lumberman's in the forest, or other use.
|
|
|
- Package Content
- 1 x gas chainsaw
- 1 x 20inch saw chain
- 1 x 20inch saw guide bar
- 1 x spark plug
- 1 x tools kit
- 1 x 2L fuel mixing bottle
- 1 x oil hopper
- 1 x instruction manual
TIPS:
Please follow the steps in the picture. There are four videos on the sales page to help you install the chain. NOTE, after the first ignition sound, closing the choke and repeatedly pulling on the start handle will suck in too much fuel and prevent the engine from starting.
- How to START a COLD engine:
- 1. Push ahead of the chain brake.
- 2. Pull out the choke knob fully.
- 3. Switch button on.
- 4. Pull out the starter handle (Max 6 times ),stop pulling when you hear a big motor sound.
- 5. Push back the choke knob fully (not half and very important ).
- 6. Pull out the starter handle again ( Max 20 times ).
- 7. Chainsaw starts.
- 8. Pull back the chain brake, hold the throttle trigger, and trigger lockout together.
- How to START a WARM engine:
- Above 1=>2=>6=>7=>8 (no need 3, 4, 5)
Why CAN NOT START the chainsaw?
- You may miss the engine warm-up if you don't push back the choke knob fully after pulling the starter handle max 6 times.
- Otherwise, the fuel oil will come out too much and flood the spark plug. Then you can't start the chainsaw.
- Why CAN NOT SPIN to cut?
- Make sure that the drive links of the saw chain fit correctly on the drive sprocket.
- Make sure that the saw chain is correctly engaged in the groove in the guide bar.
- Make sure the chain brake is pushed back to the front handle.
Características
Ships From
United StatesType
GasolineChainsaOrigin
US(Origin)Brand Name
XMSJ