Please note: If there are problems after receiving the product installation, please do not rush to file a dispute, return or refund! You may be experiencing installation or use issues 


2.4G Fan Lamp Infinite dimming controller:

Output power: ( 30-50W)X 2W
Output current; 200mA
Output Voltage; 110-180V
Input voltage:  185-265V  50-60HZ


Applicable models: The controller is suitable for bedroom fan lights. Please do not install it on fans with retractable blades.(Please contact customer service to confirm the lamp model and wiring port before ordering)





2.4G Fan Lamp Infinite dimming controller:

Output power: ( 30-50W)X 2W
Output current; 220mA
Output Voltage; 110-180V
Input voltage:  185-265V  50-60HZ





Wind guide drive:  DC Motor Control Driver

Code pairing method of the remote control: turn off the wall switch, then turn it on again, press and hold the pairing button (PAOR CODE) on the remote control immediately, the light will flicker or beep once, which means the code pairing is successful

matching issues.

2.4G wireless digital technology, one-on-one control, remote control distance, all-round partition wall remote control

Please scan the following QR code to download APP


Please note:



1. There is high voltage inside the host, non professionals are not allowed to disassemble it

When equipped with a pull switch type wall switch, the switch must be turned on in order for this product to operate remotely.

3. When remote control is not possible, please check if the battery contact is normal, if the position is reversed, and if the power is sufficient.

4. When not in use for a long time, please turn off the power of the host and remove the remote control battery.







iphone Version: