Fireplace 3D Intelligent Atomization Decoration Embedded Home Simulation Electric Fireplace For Living Room Indoor Firep

How to water ?

Manual Water

1、Open the dustproof rubber plug;

2、Place the water funnel at the water filling port

3、add water to it;

4、back to the rubber plug.

Automatic Water :

1. Open the cover on the panel.

2. Insert one end of the water pipe into the water inlet, the other end into the water, press the water button on the panel (press one time to add water, press three times to drain).

Note: If the drain port is not inserted into the water pipe remember not to press long, otherwise the water is easy to drain into the box causing a short circuit on the motherboard.

1.How long it can be opened and working for how many hours？

It can work for 7-10 hours

2.The electricity need which power ？

We have all kinds of electric head, such as European rules, British rules, according to your needs

3.Is it a silence fan motor ?

Yes ,silence fan motor

Safety and environmental protection ,the flame is touchable .

Built-in socket(fireplace length 1 m for example)

Fireplace mounting hole size: length 970mm * width 210mm * height 230mm (hollow inside)  The socket installed on the inner wall or side and its bottom cannot occupy the space atthe bottom of the fireplace.

Precautions:

1.The countertop and interior decoration of the place where the fire place installed must be moisture-proof and cannot use moisture-prone materials

2.The reserved installation slot : length 970MM* width 210MM* depth 230MM or more .

3.Leave a socket in the groove.

4.The top of the fireplace can not use reflective materials.

5. The installation surface of the fireplace must be horizontal and cannot be tilted.

6.Please add purified water or filtered tap water to prevent the fog outlet from being blocked.

lnstructions for lnstallation

1.3D atomized fireplace should be installed horizontally in a place that is not easy to move, fixed position, air Small convection.

2.The atomized flame is easily affected by the outside environment and the startup time is longer in winter.Only when the fog rises, there is often wind blowing in the installation place,which will also affect the color and shape of the flame.

A work of ingenuity

The whole machine adopts high temperature oven baking,carbon spraying, high strength impact resistance

1.3mm ultra-thin panel. Corrosion resistant,and not easy to fade color.

2.Imported LED equipped with aluminum substrate constant temperature and heatina system

3.Control panel design is simple and easy to understand and operate

4.Extended flame to the two ends of the fireplace

5.Noise reduction design and engine

6,The light bar use unique RGB design