Name: Hanging bottle type electric steam iron

product manual:

The bottle-hanging iron adopts a unique die-casting process, which has long service life, good durability, low repair rate and high steam pressure. According to the use practice, the normal service life is more than 3 years. Features: Zinc alloy steam valve frame All stainless bottom plate High reliability steam valve Beautiful (P.H.T) cover Return steam valve/steam flow adjustment Sophisticated design, easy maintenance

Uses: suitable for ironing clothing in the garment industry

Bottom plate size: 205*118 (mm)

Power supply: 200V-50Hz

Power: 1200W

Net weight: 2.4KG

Temperature adjustment range: 1-5 files

Accessories: water bottle * heat shelf * water inlet pipe * allen key * manual * spring

Preparation before use:

1:
Hang the hanging bottle filled with water on the bracket above the ironing
table, with a height of about 1 meter

2:
Connect one end of the silicone tube (with a spring inside) to the solenoid
valve of the electric iron, and one end of the leather tube (the long one) to
the hanging bottle (bucket)

3:
Loosen the open water switch (the bucket switch should be adjusted vertically
so that the water can flow out),wait for the water to fill the water pipe, and
exhaust the air inside.

Instructions:

1:
Then plug in the power and turn the power switch to the ON position.

2:
Put the temperature knob (that is, the temperature adjustment knob) at the
"arrow up" of the cover to preheat. When the indicator light is off,
turn the temperature knob and place the desired gear on the "arrow"
of the cover. "Up", after 2-4 minutes of power on, the indicator
light is off, press the steam switch (the white switch on the front of the handle),
and the steam is sprayed.

3: When ironing the clothes after the
electric iron is intermittent, steam should be sprayed first (press the air jet
switch first to let the steam spray),and then let the bottom of the iron touch
the clothes.

4: After using up, turn off the water
release switch, unplug the leather tube, press the steam switch several times
continuously until the water remaining in the iron has evaporated, turn the
power switch to the OFF position, unplug the power plug, and put the iron on
the shelf , let him cool down naturally.

Matters needing attention: In areas with
poor water quality, please use anti-scaling powder. The ratio of anti-scaling
powder to tap water should be used according to the instructions for use of
anti-scaling powder. Using anti-scaling powder can improve the reliability of
the iron.

In order to obtain a good ironing effect,
the recommended items for each knob are as follows:

1st, 2nd gear ---- preheating

Level 3 - Silk and fine fibers (low
temperature)

Level 4 - Cotton and wool (medium
temperature)

5th gear ---- hemp (high temperature)