Items in the set:

A pair of D-shaped pull hammers, 10 red cap-type suction tips, 12 blue suction cups, 8 zinc alloy metal gaskets

The product needs to be used with hot melt glue gun and glue stick. This set does not contain hot melt glue gun and glue stick.

Operation essentials: Use a yellow glue stick for good viscosity. The glue stick must be inserted into the glue gun and then heated. The glue must be applied to the gasket with a thicker surface and a larger area.

The sticky parts of the car should be cleaned and not waxed
The weather is starting to get cold now. If the top of the car body is cold, it will affect the stickiness. You can put it on a hot towel or operate it under the sun.
After all, we are not professional, so we must be patient and explore slowly

The effect depends on the repair of dents. The smaller the area, the more difficult it is. Too small. Too deep. Too thin and creases are not acceptable.
Generally, the area is larger and shallower than the corners.
The place where the dent cannot be pulled out, if you deadlift, the final result is that the gasket is degummed

Material: Chrome vanadium steel
Size: 32x10x2cm