Electric Engraving Pen Rechargeable Engraver Drill Machine for Jewelry Glass Woodworking Mini Grinder Cordless Rotary To

U.S. buyer attention:
The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military address. But you can choose ship from China.

Spanish buyers attention:
If your address includes following postal code please do not choose the Spanish warehouse.
The zip code starts with 35/38.
Overseas warehouse cannot be delivered. But you can choose ship from China

Specification: Name: Mini electric carving pen Color: Rose gold, Silver Battery voltage: 3.6V Battery: 300mA No load speed: 5000-10000-18000 Chuck size: About 2.35mm/0.09inch Chuck depth: About 25mm/9.84inch Service time: The third gear operates for more than 1 hour without load. If it needs to be used for a long time, it can be used while charging. Charging: 80% in 30 minutes, 60 minutes. Matters Needing Attention: 1.The power of this type of electric mill is small. It is a non professional electric mill and is suitable for small precision engraving and grinding. 2.Do not place the electric mill at a high temperature above 40 ℃. 3.The electric power of the electric mill is generally about 50% when it leaves the factory. It needs to be fully charged before use for the first time. 4.The charging port adopts USB type C socket. 5.Please do not cover items during charging to ensure good heat dissipation. 6.Power display: 1 lamp=30% 2 lamps=31%~70% 3 lamps=71%~100% 7.After the filling point, the electric mill will automatically turn off the electric light. 8.When it is not in use, it needs to be fully charged and then placed, and charged once every six months. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Specification: Name: Mini electric grinding pen Voltage: 3.6V Battery capacity: 280 mA No load speed: 5000-25000 Chuck size: About 2.35mm/0.09inch Host length: About 12.4cm/4.88inch Style: A: 30pcs Grinding Needles B: 42pcs Silver a Set C: 46pcs Silver a Set The full charge lasts about 90 minutes After fully charged, the maximum speed, no-load, continuous operation about 110 minutes. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Specification: Name: Mini electric grinding pen Voltage: 3.6V Battery capacity: 280 mA No load speed: 5000-25000 Chuck size: About 2.35mm/0.09inch Host length: About 12.4cm/4.88inch Style: A: 30pcs Grinding Needles B: 42pcs Silver a Set C: 46pcs Silver a Set The full charge lasts about 90 minutes After fully charged, the maximum speed, no-load, continuous operation about 110 minutes. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Specification: Name: Mini electric grinding pen Voltage: 3.6V Battery capacity: 280 mA No load speed: 5000-25000 Chuck size: About 2.35mm/0.09inch Host length: About 12.4cm/4.88inch Style: A: 30pcs Grinding Needles B: 42pcs Silver a Set C: 46pcs Silver a Set The full charge lasts about 90 minutes After fully charged, the maximum speed, no-load, continuous operation about 110 minutes. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Specification: Name: Mini electric carving pen Color: Rose gold, Silver Battery voltage: 3.6V Battery: 300mA No load speed: 5000-10000-18000 Chuck size: About 2.35mm/0.09inch Chuck depth: About 25mm/9.84inch Service time: The third gear operates for more than 1 hour without load. If it needs to be used for a long time, it can be used while charging. Charging: 80% in 30 minutes, 60 minutes. Matters Needing Attention: 1.The power of this type of electric mill is small. It is a non professional electric mill and is suitable for small precision engraving and grinding. 2.Do not place the electric mill at a high temperature above 40 ℃. 3.The electric power of the electric mill is generally about 50% when it leaves the factory. It needs to be fully charged before use for the first time. 4.The charging port adopts USB type C socket. 5.Please do not cover items during charging to ensure good heat dissipation. 6.Power display: 1 lamp=30% 2 lamps=31%~70% 3 lamps=71%~100% 7.After the filling point, the electric mill will automatically turn off the electric light. 8.When it is not in use, it needs to be fully charged and then placed, and charged once every six months. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Specification: Name: Mini electric carving pen Color: Rose gold, Silver Battery voltage: 3.6V Battery: 300mA No load speed: 5000-10000-18000 Chuck size: About 2.35mm/0.09inch Chuck depth: About 25mm/9.84inch Service time: The third gear operates for more than 1 hour without load. If it needs to be used for a long time, it can be used while charging. Charging: 80% in 30 minutes, 60 minutes. Matters Needing Attention: 1.The power of this type of electric mill is small. It is a non professional electric mill and is suitable for small precision engraving and grinding. 2.Do not place the electric mill at a high temperature above 40 ℃. 3.The electric power of the electric mill is generally about 50% when it leaves the factory. It needs to be fully charged before use for the first time. 4.The charging port adopts USB type C socket. 5.Please do not cover items during charging to ensure good heat dissipation. 6.Power display: 1 lamp=30% 2 lamps=31%~70% 3 lamps=71%~100% 7.After the filling point, the electric mill will automatically turn off the electric light. 8.When it is not in use, it needs to be fully charged and then placed, and charged once every six months. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.  1Set  x Electric Engraver Pen 30pcs x Grinding needles Style B: 42pcs x Silver a set Style C: 46pcs x Silver a set 1Set  x Electric Engraver Pen 1Set  x Electric Engraver Pen