Mini Table Saw Handmade Woodworking Bench DIY Hobby Model Crafts Cutting Tool Multifunctional Bench Lathe Electric Saw
Model: T555-1
Motor Model: 555 Double Ball Motor
Rated voltage: 24V 4A
Rated speed: 8000 rpm
Free saw blade: 60mm HSS saw blade *1 cutting depth: about 10mm
Product material: PMMA+ABS
Product Size: 18.3cm*13cm*8cm
Mini table saw supporting saw blade and cutting range
1. Premium Saw Blade [diameter 60mm thickness 0.8mm 72 teeth, cutting depth about 10mm] for general cutting quality
2, recommended blade [60mm custom blade thickness 0.6mm 60 teeth, cutting depth of about 10mm] for bamboo, mahogany rosewood and other hardwood, plastic, bone, colored soft metal plate, pipe, bar cutting, not easy Card saw, cutting speed
3, recommended saw blade [70mm custom saw blade ultra-thin 0.6mm 72 large teeth, cutting depth of about 15mm]
Suitable for cutting bamboo, mahogany rosewood and other hardwood, plastic, bone, colored soft metal plates, tubes, and bar stocks.
3, ultra-thin (diameter 80mm ultra-thin 0.5mm precision 108 fine teeth, cutting depth of about 20mm)
It is used for the precision cutting of thin tube materials such as valuable tube bar, small bar, tea brick, friable acrylic and other thin tube bars and thin colored soft metal pipe bars. ], smooth cutting surface without burrs, low material loss
4, 60mm diamond saw blade, used for jade, glass, ceramic cutting and grinding [small material processing, pay attention to the temperature of the workpiece, so as not to burn the table]
Installation instructions:
If the machine is improperly installed, it may cause danger.
■ Use the voltage and current indicated by the machine. If the source line is damaged or damaged, please replace it in time.
■Do not drop the machine so as not to damage the cabinet or damage the internal components.
■ Do not use organic solvents to clean the case
■ Unplug the power when installing, moving or cleaning the machine
■ If moisture penetrates into the machine, it may cause a short circuit.
■ Do not make any modifications to the machine or other functions
■ For safety, please use the original accessories
■ The blade must be installed in the correct direction
■ When the saw blade is frequently sawn, check whether the saw blade is worn, whether the selected saw blade is suitable, whether the backing is leveled, whether the cutting method is correct, whether the saw blade is installed correctly, whether the power supply is in compliance with the standard, and whether cutting is forcibly performed to avoid damage to the machine. .
Precautions:
1. When selecting a gear, please adjust it gradually from low to high.
2. When the machine is turned on, no object can come into contact with the saw blade.
3, when cutting, if there is a card saw, please immediately turn off the power switch, and then do other operations.
4. It is forbidden to cut the saw for a long time so as not to burn the motor or the power supply [not covered by the warranty]
5. The machine cannot use AC power directly.
6, please use the original power supply. Please refer to the rated voltage and current of the machine for the customer who owns the power supply. The relevant responsibility is at your own risk. The company does not provide relevant after-sales protection.
7. During use, please do not cover the cooling holes.
