18/20 Inch 58CC Chainsaw Gasoline Powered Engine Wood Cutting Tool Garden Gas Chain Saw

18 inch gasoline chain saw 58CC

Specification

Main Material: Aluminum Alloy + Manganese Steel + PP

Color: Red

Engine: Single-cylinder, Air-cooled, Two-stroke Gasoline Engine

Power Source: Gasoline-powered

Displacement: 58cc

Power: 3.2kw

Horsepower: 4.4 hp

RPM: 10,500rpm

Idle Speed: 2800-3200r/min

Oil-gasoline Mixture Ratio: 1:20-25

Ignition System: C.D.I

Starting Method: Hand Pull Start

Fuel Tank Volume: 550ml/18.6oz

Chain Oil Tank Volume: 260ml/8.79oz

Carburetor Type: Diaphragm Type

Cutting Range: Up to 20.32cm/8in in Diameter

Guide Plate Size: 45.72cm/18in

Package Size: 51*29*31cm/20.08*11.42*12.2in

Product Size: 83*23*28cm/32.67*9.05*11.02in

Gross Weight: 7.4kg/16.31lbs

Package Included

1*Gas Chainsaw

1*Guide Plate

1*Chain

1*Baffle Plate

1*Guide Plate Protection Sleeve

1*Gasoline Bottle

1*Funnel

1 Pair*Gloves

1*English Instructions

All Accessories for Assembly

Notes

1.Please read the user manual carefully before use and pay special attention to the safety precautions included.

2.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you place the order.

Key Features

High Speed: It uses a high-stiffness sharp chain to ensure smoother cutting. With a chain speed of up to 10,500 rpm, it can easily cut large wood up to 8 inches in diameter in a short period of time.

Comfortable and Labor-saving: This gas chainsaw features a compact (32.67*9.05*11.02in) and comfortable design. The ergonomic handle provides maximum slip resistance and comfort.

Great Durability: Powerful gasoline generator provides longer-lasting power and longer service life. Our upgraded gas chainsaw makes it easier to cut hard and thick wood with sharp, durable blades that don't need to be replaced as often.

Long Endurance: It has a large 18.6oz fuel tank that lasts for almost 30-40 minutes, providing continuous power for outdoor work.

Safe and Reliable: The safety lock and on/off button must be pressed at the same time to start, preventing accidental starting. Flaps prevent debris from splashing. Overheat and explosion protection is designed for maximum protection for you and your family.

Easy to Use: The automatic oiling system lubricates the guide bar and chain as you cut, eliminating the need to add oil and saving you more time and effort.

Anti-vibration: It uses an excellent anti-vibration system that greatly reduces the operator's vibration level. Therefore, you can have better control.

Energy-saving: This gas chainsaw's effortless start ensures that the chainsaw starts quickly with minimal effort, so it consumes less fuel and emits fewer emissions than a typical chainsaw.

User-friendly Design: It uses a jet air cleaning system to remove larger dust and debris particles before they reach the air filter, reducing air filter cleaning and improving the life of the engine.

Practical Gift: This gas chainsaw is a necessary tool for every home to install furniture or outdoor felling. Therefore, it is a wise choice for those who own a new home.

Details

Ventilation Holes: There are many ventilation holes on the side of the machine, which can ensure the normal temperature of the motor and prevent burning.

PP Shell: It adopts a high-quality PP shell, which has high mechanical strength, good toughness and high tensile and compressive strength. It can well protect the machine from environmental interference.

18inch Guide Plate: Its guide plate is designed to be 18inch long which is great for tree trimming, yard cleaning, firewood cutting, etc.

Application, It can be used for wood cutting, forest felling, tree pruning, shrub pruning, and home improvement, widely used in gardens, farms, parks, forests, pastures, orchards, and indoors, to meet the needs of wood cutting up to 8 inches in diameter.

20 inch gasoline chain saw 58cc

Specification

Color: Orange

Style: Modern

Model: 5800

Assembly Required: Yes

Material: Nylon, Mn Steel, Aluminum

Engine Type: Single Cylinder, Air-cooled, 2-Stroke

Ignition System: Self-reset Pull Start

Fuel Tank Capacity: 550ml/18.6Oz

Chain Fuel Tank Capacity: 140ml/4.73Oz

Bore: 45.2mm/1.78inch

Volume: 116dB

Power: 2.4kw

Speed: 10000rpm

Displacement: 58cc

Oil Mixture: 25:1(90# Gasoline: Oil)

Chain Length: 50cm/20inch

Max. Cutting Diameter: 50cm/20inch

Overall Size: 91*24*29cm/35.82*9.44*11.41inch

Package Size: 50*27*30cm/19.68*10.63*11.81inch

Gross Weight: 7.5kg/16.53 lbs

Net Weight: 7kg/15.43 lbs

Package Included

1* Gas Chainsaw

1* Chain

1* Guide Bar

1* Chain Bar Cover

1* Fuel Tank

1* Tool Bag

1 Pair* Gloves

1* Screwdriver

1* Funnel

1* English Manual

Other Accessories for Assembly

Notes

1.Before starting the gasoline chainsaw, please ensure that it fits well with the guide bar, and use a wrench to adjust the chain. When installing the guide bar, please note that the screw column on the side cover must be aligned with the guide bar hole before installation(The function of the screw column is to adjust the chain tightness.).

2.Please use gasoline 90# with special 2-cycle engine oil and never use pure gasoline. Gasoline and oil mixture ratio: 25:1. The oil output can be controlled to turn larger to the left and smaller to the right.

3.Please note that after the first ignition sound, closing the choke and repeatedly pulling the start handle will suck in too much fuel and prevent the engine from starting.

4.If the choke knob is not fully pushed back after pulling the starter handle up to 6 times, the engine preheating may be missed. Too much fuel will flow out and submerge the spark plug. Then you can't start the chainsaw. The damper is used to regulate air intake. When the engine is cold or not used for a long time, the damper needs to be pulled. If the engine is hot, it can be started directly. This is the same as the principle of starting a motorcycle! Close the damper, pull the start handle again 1-3 times to start it, and then you can use it normally.

5.Please pay attention to the tightness of the chain during installation (Pull the chain by hand. The distance between the chain and the guide plate is 0.12-0.2 inches.),otherwise, it will affect the use effect.

6.After the chainsaw is started (The oil filler door must be empty.),it must wait for the chain to receive oil before starting to work(The oil pump will discharge oil and the ground will become wet.).

7.The carburetor must be cleaned after every 100H of operation before use. The air filter must be cleaned after 8H of operation. When the chainsaw is not in use, it is better to pack it in plastic bags to avoid dust and water entering the machine and affecting its use. If the chainsaw is not used for a long time, the fuel oil in the tank must be cleaned.

8.Please read the manual and product labeling completely before installation and use, and pay particular attention to the safety instructions included.

9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

Key Features

Build to Last: It is made of high-quality nylon housing, aluminum handle, and Mn steel guide bar&chain, which is insulating, strong, durable, wear-resistant, and not easy to deform.

Excellent Performance: The 2-stoke engine with 58cc displacement, 10000rpm high speed, and 2.4KW high power, the high-magnetic flywheel with thickened blade design, the filter, the pressure-reducing valve, and the 20" guide chain can achieve fast cutting, thus providing excellent performance(about 20" cutting diameter).

Cost Saving: The combination of this quality carburetor and automatic lubricating oil system enables the product to provide a stable and economical supply of chains and bars, quickly and easily adjust chain tension, and reduce friction and oil consumption by 20%, thereby improving cutting performance and extending service life.

High Safety: The double protection switches that must be pressed at the same time to work can prevent the machine from accidentally starting. The heat-sink holes on the machine also ensure good heat dissipation. Moreover, the guide plate has an inertia-activated chain brake to reduce the possibility of injury due to recoil, and the practical gloves and the widened brake baffle that makes emergency braking can protect your hands from hurting, avoid sawdust splashing, and improve safety.

Convenient and Comfortable: With a hand-pull spring-loaded starter handle, premium spark plug, safety switch, and throttle switch, it's convenient to use. Its cordless design and non-slip shock-absorbing ergonomic handle allow you to operate more easily and freely. Moreover, the silencing and damping designs can effectively reduce noise and vibration, providing you with a multi-angle cutting by changing the direction of the machine, which is convenient for you to use.

Easy to Install: The simple structure, complete accessories, and English manual allow you to install this product in minutes, saving you time and labor.

Protective Package: To prevent the product from being damaged and bumped during transportation, we packed it with foam and a bubble bag to protect your products to the maximum extent possible.

Customer Service: We aim to provide quality products and services. If you have problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.

Details

Tool Bag: It can help you organize your accessories in an orderly manner, making it easy for you to carry around and effectively preventing accessory loss.

Fuel Tanks: The 18.6Oz translucent fuel tank and 4.73Oz chain fuel tank allow for large capacity, a convenient mixture of fuels, and long-term use without frequent filling.

Double Nuts and Piston Rings: The guide plate is fixed with double bolts to ensure the stability of the product and make the chain not easy to loosen. The rings make the product sealing performance better, which can increase the machine's power.

Guide Bar Cover: It allows for convenient storage and better protection of the guide bar when not in use.

Application

It is suitable for forest harvesting, cutting wood, pruning branches, gardening, home woodworking, bamboo sawing, logging, light felling, DIY crafts, ranches, farms, and so on to meet different needs.