88VF Electric Cordless One-Hand Saw Chain Saw Woodworking W/ Display Battery Kit
Specification:
Body Also Suitable For 18V Battery
100% brand new with high quality
Voltage: 88VF 20V
Battery Power: 1200W
Guide Plate Length: 4 Inches
Chain Speed: 5M/S
Cutting Size: ＜100 mm
Battery: 6500 mAh 1 BATETRY
Electric Drive: Strong Magnet Motor
Chain: Quick Adjustment
Material: Metal Steel Chain
Optional Pattern: ONLY BODY/1 Battery SET/2 Battery SET
Features:
- Practical, fast speed, low power consumption.
- Pure copper motor, strong power, fast cutting, improve efficiency.
- Fine quality switch, fast and slow adjustment, stepless speed change.
- Fine quality guide plate chain, deep quenching, more wear-resistant, smooth cutting.
- Rechargeable electric chain saw, light and portable, long battery life, no damage to the bark.
- Lightweight body, light and convenient, lightweight design, long time holding and not tired hands.
- Intelligent circuit control board, overload protection, to meet your different construction needs.
- One hand control: Small size, can be held with one hand.The mini chainsaw weight just about 0.7kg and a total length of only 33cm (13inch).
- Special guide plate, tungsten steel ball does not need to be lubricated, so that the machine reduces resistance during operation and reduces wear on the machine.
Package Included:
Pattern 1:
1 x Electric Chain Saw For 18V Battery(ONLY BODY)
1 x Screwdriver
1 x Wrench
1 x User Manual
Pattern 2:
1 x Electric Chain Saw
1 x Battery
1 x Charger
1 x Screwdriver
1 x Wrench
1 x User Manual
Pattern 3:
1 x Electric Chain Saw
2 x Battery
1 x Charger
1 x Screwdriver
1 x Wrench
1 x User Manual
Precautions:
1.The chainsaw suddenly stops during use, not because the machine is damaged, but because the motor overload protection device is activated. Just wait for 1-2 minutes to use it again (when the battery is fully charged).
2.Do not press the switch button to the end, but slowly press it to avoid the protection device from starting due to overload of the motor. Warm Tips:
- NOT compatible for G Series battery such as BL1813G(196663-9) BL1413G(196882-7) BL1415G BL1430G BL1815G and so on.
- NOT compatible for 18v Ni-CD battery such as 1822(194465-7). - NOT compatible for 18v BL1860B. Important:
1.Please install the saw according to the instruction. If you have any doubt, contact us for the installation video and picture of the saw. 2.The chain should not be installed too tightly at the beginning, otherwise the internal gear will slip and affect the use.
3.If the battery is fully charged and the motor makes a sound, the electric saw still does not rotate, which may be the reverse installation of the chain. Please try again in reverse. 4.Each set of saw is of EU PLUG standard specification, and we will distribute adapter according to the national voltage. 5.When cutting, one end of the wood strip must be fixed, which can be stepped on by foot or fixed with a cutting board.
|
