LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup Gravity Feed With Mixing Cup No Clean Disposable Measuring Cup Type H/O Qu

Published: 11.05.2024 15:46 In stock: 587 709 Views

Favorites Seal Share

6 photo

Description

LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup Gravity Feed With Mixing Cup No Clean Disposable Measuring Cup Type H/O Quick Cup

Specification:

Type of feed:Gravity

Standard Nozzle:1.3mm and 1.7MM

Operating pressure:2.0-3.0 bar

Pattern Width:220-320mm

Air consumption:3.0-3.9cfm

Paint consumption:130-170 ml/min

Paint cup capacity:600cc

Paint ratio >= 65%

Feature:

Suitable for water-base paint or other middle viscosity paint .Paint speed 10-12m/minute.

Suitable for all kinds of surface spraying.

15 holes of air cap.

Spray gun can operate at less than 10 psi at the nozzle cap as compared to HVLP which operates at 10 psi at the air cap and is usually pushed higher.

LVLP spray gun use of lower volume of air finely atomizes paint creating a smooth finish with minimum overs pray.This means very little over spray will be produced. Saving on paint cost and environment hazrds.

Title 1, LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup G... Title 2, LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup G... Title 3, LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup G... Title 4, LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup G... Title 5, LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup G... Title 6, LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup G... Title 7, LVLP Spray Gun 1.3 and 1.7mm Nozzle 600cc Cup G...