Feature:

* Natural mica heating core, fast heating, long life, replaceable, easy to disassemble.

* High-quality ABS plastic shell, comfortable grip, long-term use without fatigue.

* The tin wire scaffold is removable and easy to use.

* With power switch, more energy saving and safer. The power cord is soft, bendable and more durable.

* Built-in heating flashlight to prevent users from being scalded by high temperature.

* The side door design is convenient for viewing the internal operation and replacing the heating core.

* One-handed operation, check the tin condition at any time, and it is not easy to make mistakes.

Specification:

Alloy nib + ABS strong plastic

Operating temperature:

The temperature is not adjustable (480℃)

Power: 60W

Tin wire with a nominal diameter of 0.5-1.2mm.

Use:

1.Hand gun used for the first time, be warm a few minutes, a smoke is a normal phenomenon, will disappear in a few seconds.

2.Will be rated into the tin from the tin line into the mouth, and then pull the trigger

direction of the arrow until the tin lead solder wire to the nozzle only to be working.

3.Stop the use or replacement of tin wire to be out, as long as the direction of the board-up drive, and remove the tin wire.

4.Heater replacement, the first protective cover removed, open the heater connection,

and then remove the iron Tsui to the core of the heat can be replaced.

Notes:

1.At work, iron and iron pipe Tsui temperatures up to 400 degrees Celsius, non-human touch to prevent burns.

2.Stop using the hand gun, set it on its bracket.

3.Work is completed, turn off the power so to save the place after cooling.