Black Loft Wall Ladder Stairs

Maintenance Information

Users are responsible for the proper operation and maintenance of the equipment they use. Some equipment will quickly become damaged and unsafe if abused or subjected to improper demands. If equipment is regularly maintained and not abused, you will get the maximum safety and service performance from loft wall ladder stairs.

• Do not overload ladder stairs.

• Do not knock it vigorously.

• Do not disassemble it casually.

• Do not open the tripod forcibly.

• Do not play movement on ladder stairs.

These uses create severe impact and shock loads that may lead to steps and equipment failure.

Installation Instruction

• Put the lock-rod into the lock hole.

• Lock the lock-rod by pin.

• Tighten the bolt of the four corners.

• Pull the ladder stairs up and fasten the lower edge of the hole.

• Put metal triangle panel on bolt and tighten it.

Watch out when you install the ladder stairs. Do not stand under the hole when you install the ladder stairs.

Check Equipment

Periodically turn ladder stairs on its end or side and check the following:

• Look for broken welds or deck boards.

• Tighten loose nuts and bolts.

• Look for ladder stairs frame distortion caused by overloads and impact loads.

All the check is for your safety.

Item Include

• A set of Black loft wall ladder stairs and a copy of specification.