aa**********in
ch**57
ag******er
no*******er
Characteristics
Description
DC 24v 210w 2 inch brushless solar water pump Max.lift 80m for irrigation Deep Well pump outlet 0.5 inch 2SPS1.5/80-D24/210
Suggest Solar Panel Assemble：1pc 36v 280-340w
Attention:
1. The quoted price including: Pump+MPPT controller+Accesories,WITHOUT SOLAR PANELS;
2. If solar panel needed, Pls kindly let us know, we will quote accordingly (But we suggest purchasing PV panles locally to save highcourier cost, further more, big size solar panels is very fragile during delivery via express)
3. Free accessories including:
a. pump with 30cm cable b. Pump controller
c. Cable connector
d. Water level sensor
Performance curve
Complete Set
Accesories
a. spare parts:1 pc stainless steel screw b. Cable connector
c. 3 pcs water level sensor
MPPT controller
SOLAR POWERED SCREW WATER PUMP SERIES
Model | solar array voltage (V) | solar array Power (W) | Max Flow (M3/H) | Max Head (M) | Outlet (IN) | With MPPT function Controller | PUMP SIZE | suggest Solar Panel Assemble | Link |
2SPS1.0/30-D24/80 | 36 | 110 | 1 | 30 | 0.5" | Yes | 2" | 2 pc 18v 60w, in series | Click here |
2SPS1.3/50-D24/140 | 36 | 180 | 1.3 | 50 | 0.5" | Yes | 2" | 1 pc 36v 190w | Click here |
2SPS1.5/80-D24/210 | 36 | 280 | 1.5 | 80 | 0.5" | Yes | 2" | 1 pc 36v 280w | Click here |
2SPS1.5/95-D24/270 | 36 | 360 | 1.5 | 95 | 0.5" | Yes | 2" | 2 pc 36v 190w, in parallel | Click here |
Descriptions
(1)Selecting the solar panel of the pumping system
a. Solar PV panel (solar panel) selection
power of PV panels (watts) =Rated power of pump (watts) x( 1. 3 ~ 1.6)
voltage of solar panel = Rated voltage of pump (volt) x 1.5
the controller will already be matched to the pump by your supplier
eg A 300 watt pump needs a minimum of 390 watts of PV panels to drive it (300w x 1.3 = 390w)
b. You may need combinations of panels, especially for the larger pumps. During connection of solar panels, you have to get the solar panels in series to reach the rated voltage of the pump, then in parallel to reach the rated current of the pump
Panels in parallel double the current and the wattage of the panels
Panels in series double the voltage and the wattage of the panels
e.g. 2 x 12V/ 100 W panels in parallel → 12 V/200W system
2 x 12V/ 100 W panels in series → 24V/200W system
2. INSTALLATION
(1) Function of solar pump controller box
Low voltage protection(It is automatic)
Over voltage protection(It is automatic)
a. Over current protection(It is automatic)
b. Protection for low water level in well (WC,WH sensors)
c. Protection for full water level in tank (TC,TH sensors)
d. Controlling running speed of motor (Speed regulator)
e. Delay for restart working function (Timer regulator is to be set a period of rest time after the pump stops working from low water level protection in well)
f. MPPT function. (Maximum Power Point Tracking)
(2) Wiring the controller box
Before you start wiring the control box,switchmust bein the off position.
Wire the pump, panels to the control box as per the wiring diagram below. Both the pump and controller are labeled with “U”, ”V” and “W”. Make sure to be correspondingly connected and not touch with each other.
Pumps, controller boxes, solar panels, connection diagram
Factory
Application
If you do not know how to choose the model,pls tell the question below,i will choose for you.
1. What is your requirements for the flow rate of the pump? that means how many cubmic meter water you need per hour.
2. what is your requirements for H1 =? H2= ? H3= ? H4 = ?
Please leave us message if any questions,we will reply ASAP.
