Pump Features:

1. Permanent magnet DC brushless synchronous motor, designed for solar, with 15-20% efficiency improved.

2. Brass outlet/connector/oil cylinder.

3. The double bearing motor base can work under more axial pressure.

4. Alloy mechanical seal: Longer working life and high reliability.

5. Intelligent water shortage protection: The pump stops working automatically when there is no water in the well, and automatically start working 15-30 minutes later.

6. Pump can start working when power is enough every morning.

7. 2 years warranty.

Controller Features:

1. High waterproof grade: IP65, double seal effect in waterproof and leak-proof

2. Soft start technology: No impulse current, longer life for the pump motor.

3. High voltage/Low voltage/Over-current/High temperature protection

4. 1 years warranty.

Specifications:

Rated power: 120W / 0.16HP

Max. Pump rate: 1,200L/H or 20L/min

Max. Head: 56m

Max. Temperature of water handled: 35 degree Celsius

Outlet diameter: 0.75 inch / 19 mm

Pump Size: 3 inch / 76 mm

Length of cable: 2m

Max. Open circuit voltage: 48V

Product size: 90 x 24 x 14cm

Weight: 9kg

What We Get For You (Package Include):

- 1 x  DIFFUL® 3" DC stainless steel solar Pump with 2m cable

- 1 x  DIFFUL® Pump controller with MPPT function

- 1 x  Stainless steel float switch (sensor for the tank)

- 1 x  Pump outlet joint connector

- 1 x  Splice kit for cable join

- 1 x  Splice kit for waterproof

What You Need To Get By Yourself (Package DO NOT Include):

- Suitable solar panels. There’re some suggestions in the instruction book.

- A stainless steel wire ( called safety cable) to hold the pump in the bore. If pumping water from dam or river, a float set up required.

- A poly pipe from pump to the water tank.

- Wire power cable (3 wires no earth). we recommend cable size at least thicker than the original cable in the pump.