Leicozic 10000W DSP Amplifier Subwoofer Amplificador 4 Channel GaN FIR Filter Equalizer Line Array Ampli Digital Dante 8
Description
Leicozic 10000W DSP Amplifier Subwoofer Amplificador 4 Channel GaN FIR Filter Equalizer Line Array Ampli Digital Dante 80-296V
Power Rating Of 4-Channel GaN DSP Amplifier 3 Models
GaN430
8ohm/Stereo（RMS）4*3000W
4ohm/Stereo（RMS）4*5000W
2ohm/Stereo（RMS）4*6800W
8ohm/bridge（RMS） 2*10000W
4ohm/bridge（RMS） 2*11000W
GaN420
8ohm/Stereo（RMS）4*2000W
4ohm/Stereo（RMS）4*3600W
2ohm/Stereo（RMS）4*4500W
8ohm/bridge（RMS） 2*7200W
4ohm/bridge（RMS）2*9000W
GaN413
8ohm/Stereo（RMS）4*1300W
4ohm/Stereo（RMS）4*2400W
2ohm/Stereo（RMS）4*3000W
8ohm/bridge（RMS）2*4800W
4ohm/bridge（RMS）2*6000W
Main Feature
*DSP processor module and operating software are designed and produced in Germany, with optional Dante function
*Gain,signal routing, frequency division, delay, voltage limit, FIR and other parameter debugging functions
*Adopting gallium nitride technology, high efficiency, low heat generation, reliable and durable, strong puncture resistance, clean sound, and low distortion
*Stable and reliable 2 Ω drive capability, perfect for line array speaker systems
*80V-296V wide voltage operation
*Adopting active PFC and soft switching technology, with a maximum power correction factor of 0.99
*With ROSH, CE certification, national quality inspection report, energy conservation and environmental protection certification, and can pass various 3C tests
Frequency response：20Hz-20kHz,+0/-1dB
Total harmonic distortion: <0.5%,20Hz-20kHz
Intermodulation distortion: <0.05%
Conversion rate: 50V/µs @ 8 Ω
Damping coefficient: >5000 @ 20-200Hz
Signal to noise ratio: >110dB
Crosstalk: -75dB
Gain selection:32dB/35dB/38DB/41dB
Weight and size(W*H*D): 12KG,482x44x460mm
Digital signal processor : 64 bit multimode，4INPUT 4OUTPUT
AD converter : 120db Dynamic Range
DA converter : 110db Dynamic Range
Saving presets :100
INPUT: Analog/optional Dante
Delayrange : 0-10ms
EQ :5-segment formation balance, 10 segment input/output balance
crossover filter : Linkwitz-Riley，Belssel，Butterworth
FIR filter 4x144taps
Software Parameter
Inputs:
Analog Inputs (single ended) : 4
Dynamic Range : typ. 120 dB(A)
Max. Input Level : +20 dBu
Input Impedance (single ended) : 11kΩ
Outputs
Analog Outputs : 4
Dynamic Range : typ. 110 dB(A)
Maximum Output Level (default setting) : +14
dBu
Output Level Setting (by jumper) : +8 / +14
dBu
Source Impedance : 235 / 470Ω
System
Input-to-output latency : 510µs
Gain : 0 +/- 0.5 dB
Dynamic Range (unity gain) : typ. 107 dB(A)
THD (@ 0dBu, 1kHz, unity gain) : < 0.003%
Frequency Response : 10…20k Hz +/-0.5dB
DSP :
64 bit multimode ALLDSP AM685
Number of processors : 1
Sample rate : 48khz
FIR : 4x144 taps
Presets : 100
Delay : 10ms
PEQ (each input and output) : 10bands
Grouping EQ (each input) : 5bands
Crossover (each input, LPF and HPF) : 24dB/Oct
Crossover (each output, LPF and HPF) : 48 dB/Oct
Filtered Compressors (each input and
output) : 4 bands
Limiter (switchable true RMS / Zero Attack,
each in and out) : 1 bands+H2:N33
