6W DIY MP3 Decoder Board 5V 2x3W Amplifier Bluetooth 5.0 MP3 Player Car FM Radio Module Call Recording TF AUX WMA WAV FL
Description
With 3.5mm Mic jack
Microphone function
Bluetooth version 5.0
Power supply voltage: 5V (range 3.7V-5V) and current not less than 1A.
Power: 2*3W, and two 3W speakers can be connected at the same time.
Connect the 3.5mm microphone function,
Support calling (long press the pause button to answer the call when there is a call).
Support recording. Recording only supports operation in TF mode or USB mode.
Support power-off memory
Folder switching function
Music format: MP3/WMA/WAV/APE/FLAC lossless music format.
Radio FM frequency: 87.5—107.5mhz.
Introduction of support function: Support MP3/USB/TF/LINE IN/FM/Bluetooth/DC 5V.
No 3.5mm Mic jack
1. ON/OFF: power switch;
2. DC 5V: charging interface;
3. Switch indicator;
4. Microphone: call function;
5. USB: Connect U disk (maximum support 32GB);
6. VOL-: Short press is to select the previous song; long press is to decrease the volume;
7. PLAY/PAUSE: Short press is to switch between pause and play; long press is to switch between USB / TF / FM / LINE IN / BLUETOOTH, short press is to automatically search channels in the radio FM state;
8. VOL+: Short press is to select the next song; long press is to increase the volume;
9. TF: Connect TF memory card (maximum support 32GB);
Bluetooth version: Bluetooth 5.0
With Bluetooth call function, power supply voltage is 5V, current requirement is above 2A
Music format: MP3 / WMA / WAV / FLAC / APE lossless format music
Power: 2*3W, connect 2 3W speakers
Radio FM frequency: 87.5-107.5 MHZ
Support function introduction: support MP3 / USB / TF / LINE IN / FM / BLUETOOTH / DC 5V
About the structure: Panel size: 71 * 22 MM, the depth of the board is 26 MM, the distance between the two screw positioning holes is 59MM