HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver FM AM LW MW SW-SSB DSP LSB Si4732 with 2.8" Touch Screen + Battery Anten

Published: 19.04.2024 In stock: 197 1.02K Views

Favorites Seal Share

6 photo

Description

HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver FM AM LW MW SW-SSB DSP LSB Si4732 with 2.8" Touch Screen + Battery Antenna

Specifications:
- Model: ARESQ AQ1
- FM: 64-108 MHz
- MW: 522-1620 (520-1710)kHz
- LW: 153-513kHz
- SW: 1711-29999kHz
- Battery: 3.7v 18650 2500mAh
- DC in: type c at 5V 1A Max
- HW: 2.8-inch 9341 SPI touch xtp2046
- MCU is ESP32 si4732 pam8406
- Size: 96 x 67 x 38 mm/3.8 x 2.6 x 1.5"
Title 1, HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver...

Title 1, HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver...

Package Included:
- 1 x Radio Receiver
- 1 x Antenna
- 1 x USB Cable
Title 2, HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver...

Touch Screen Button Functions:
- HAM-Select ham band 10M-630M
- BAND-Band Select FM LW MW CB SW 11M-120M
- FREQ-Freq input Then Press OK X Exit
- BFO-Enable On HAM band +- 975Hz Max (frequency deviation Adjust) or Long Press Encoder
- STEP-100K/10K on FM 1k/5k/9k/10k on AM/MW/SW 1k on USB/LSB Ham Band
- BANDW-SSB Filter 0.5/1/1.2/2.2/3/4khz; AM Filter 1/1.8/2/2.5/3/4/6 Khz
- MODE-LSB/USB/AM/CW
- AGC-Auto Gain Control ON/OFF
- OFF-Power OFF the Radio
- VOL-Volume set 0-63 50-60 is better
- RETRO-Old Radio Theme
- MEMO-75 Memory BANK EDIT ADD DEL. Click to Select FREQ in Memory
- SETUP-Vertical screen/Bright Disp power (10 min power save mode off screen)
- >>UP-Freq scan UP and Down
- LIGHT-Back Light 0-100%. When save 0%, you can't see anything. Long Press Encoder then Press Power On to Solve
- SCAN-frequency spectrum scan mode
- CHIP-Firmware Information
- INFO-Software version v3.4 Mode freq
RSSI SNR Power Supply EEPROM SIZE

Title 3, HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver... Title 4, HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver... Title 5, HAMGEEK ARESQ AQ1 Mini Full Band Radio Receiver...