NOTE: EU Countries Charge VAT On Products over €150, So EU Countries Automatically Deduct The Tax From The Price, But Need To Pay Customs Or VAT , More Details Please chat to us.

Introducing the 100% ECOWater Vapor Fireplace-a revolutionary alternative to traditional fireplaces.

 

Immerse yourself in the warmth and ambiance of a traditional fireplace, minus the risks. Our water vapor fireplace utilizes ultrasonic atomization to transform pure water into realistic, touchable flames, illuminated by LED lights.

 

Key Features:

 

1. Eco-Friendly Design: Consumes only pure water, eliminating the need for traditional fuels.

2. Fire Risk-Free:Touchable flames make it safe for children and pets, with no risk of fire.

3. Intelligent Operation: Automatic water management and remote control for customizable settings.

4. 5-Year Warranty: Guaranteed product quality and operation, with free replacement for any issues.

5. Humidification Feature: Enhance indoor air quality by supporting aromatherapy or disinfectants.

 

Create a safe, eco-friendly, and aesthetically pleasing atmosphere with our water vapor fireplace-experience the beauty of a crackling fire without any traditional risks.

 

 

 

Touchable Flame

 

 

 

 

Material: 304 # stainless steel tank, other part is steel powder coating .

 

Panel size :

800 * 240 * 210 mm/ 31.50'' * 9.45'' * 8.26''

1000 * 240 * 210 mm/ 39.37'' * 9.45'' * 8.26''

1200 * 240 * 210 mm/ 47.25'' * 9.45'' * 8.26''

1500 * 240 * 210 mm/ 59.06'' * 9.45'' * 8.26''

1800 * 240 * 210 mm/ 70.87'' * 9.45'' * 8.26''

2000 * 240 * 210 mm/ 78.74'' * 9.45'' * 8.26''

 

Base size :

780 * 210 * 220 mm/ 30.71'' * 8.27'' * 8.66''

980 * 210 * 220 mm/ 38.58'' * 8.27'' * 8.66''

1180 * 210 * 220 mm/ 46.46'' * 8.27'' * 8.66''

1480 * 210 * 220 mm/ 58.27'' * 8.27'' * 8.66''

1780 * 210 * 220 mm/ 70.08'' * 8.27'' * 8.66''

1980 * 210 * 220 mm/ 77.95'' * 8.27'' * 8.66''

 

 

Built-in socket (fireplace length 1 m for example)

Size of fireplace mounting hole: Length 970mm * width 210mm * height 230mm (hollow inside)His socket installed on the inner wall or side and its bottom cannot occupy the space at the bottom of the fireplace.

Note:

1. The table top and interior decoration of the place where the fireplace is in.stalled must be made of moisture-proof materials that cannot be easily damp.

2. Leave a socket in the groove.

3. Reflective materials cannot be used on the top ofthe fireplace.

4. The installation surface of the fireplace must be horizontal andcannot be inclined.

5. Add purified water or filtered tap water to prevent the mist outlet from being blocked.

 

 

We can also customize the power cord according to your local outlet!

 

 

The fireplace is packed in wooden/honeycomb crates to ensure that the fireplace will not be damaged during transportation.

 

 

Buyer need to know below precaution

1. The 3D atomizing fireplace should be installed horizontally in a place that is not easy to move. The air convection in the fixed position is small.

2. When build the wall hole of fireplace, avoid caused effect of poor flame by backward suction when the machine is running. So air vent should be reserved.

3. The atomizing flame is easy to be affected by the outside world. it takes a long time to start up in winter before the fog rises. The frequentwind in the installation place will also affect the flame color and shape.

4. In oder to extend life of burner, suggest used purified water, in case dirt of water lead to fireplace unable to work after long time used.

5. Someone must watch when adding water. Be careful not to let water flow into the inside of the product except when the water comes out. In order to avoid damaging the electrical parts installed in the product, it can be used for 2-3 days after adding water once.

6. If you need to move / move the machine, remember to cut off the power first, drain the water in the water tank, and then carefully test the panel temperature of the machine by hand before moving /moving.

7. The 3D atomization fireplace is tiled in the groove, and the socket needs to be reserved in the groove.