Product information:
Material: Metal
Performance: Warm and cold in one
Control mode: manual adjustment
Size: 34*12*8CM
Current: 5A
Voltage: 12V 24V
Power: 60W
Automobile air conditioning type: heating
Product description：
The heat source of the heater is to use the waste heat of the engine cooling water and send it to the radiator of the heater through the water pipe.
As long as the engine does not stall, the cooling water keeps a "small cycle" with the radiator. It is in conjunction with the engine radiator.
United. Because the radiator of the heater has no thermostat, the heat source can be maintained uninterruptedly. Drive of heater
The driving device is powered by a DC motor, and the hot air is delivered to the car through a blower. At the same time, the hot air can also be delivered to the car.
Remove the ice from the cab windshield. There are two water pipe joints on the water tank to connect the heater pipe.
Once in and out, the water pipes connecting the water tank and the engine need to be cut off, and three-way lead-out rubber pipes and stand-by machines need to be added.
Connecting, filling anti-freeze liquid and emptying the gas in the system, and connecting the positive and negative poles of the power supply with motor wires are all techniques.
If the operation is not done properly, there will be problems.
Packing list:
1* heater
Product picture:
