Dimensions: 17x6x8 (cm)

Manual measurement may have errors
Working method: Ultrasonic
Input voltage: 1.5V
Material: plastic

Product does not contain batteries

The four suction cups at the bottom of the cleaning agent are immersed in water and adsorbed on the table to pre-

ntroduce clean water, add a little neutral detergent effect is betterUltrasound design, efficient cleaning of oil stains, sweat on glasses

The solution is introduced into a dedicated box and placed in a contact lens

Ultrasound design can better remove the secretions attached to the spectacle lens

Cleaning time for frames and contact lenses is recommended 2-3 times per week for 1-2 minutes each time.

When cleaning the eyes, inject 70% of care solution into the box. Contact lenses are placed in the middle of the box. Do not place on the edge of the box.

1. Install two 1.5V No. 7 batteries in the correct direction at the bottom and change the battery cover. For the battery life, it is best to remove the battery when not in use.2. Place the cleaner in a smooth flat place and press it downwards to fix the suction cup. When cleaning the contact lens, place the sunspot containing the contact lens and the care solution in the slot in the cleaner.3. Clean the glasses or other items on the frame, cover the items with clean water, and then add the detergent4. Press the switch, the machine starts to work, vibrate for 5 minutes, at the same time, it sounds that it is working properly

5. When you want to stop, press the switch again, it means cut off the power to stop working, you can remove the cleaned items

Product material: plasticProduct Model:SD-280Working method: Ultrasound

Input voltage: 1.5V

Ultrasonic cleaning principleUltrasound produces tiny bubblesWater molecule explosion burst

Stain stripping object

Frame glassesMore than a few timesclean with a clothLens is no longer gray

Contact lenses

More than hand washing effectseveral times strongerStrongly clean lenssurface proteins and stains